Linux Framebuffer Driver for the 3DLabs Permedia3 chipset.

ATTENTION : Ni mon employeur, ni aucun organisme de tutelle de l'Irisa ne pourra être tenu pour responsable des propos, informations ou logiciels diffusés ici sous ma seule responsabilité.

WARNING: This is a private page. Those pages and the informations and softwares they contain are my own and do not express the opinion of the Irisa.

Author

Romain Dolbeau

Status

This driver is still very experimental :

I'm looking for success/failure reports & beta-testers, please contact me if you have a permedia3 board (and linux of course)

it's known to work on the Formac ProFormance 3 board (on an Apple PowerMacintosh)
it has been well tested on this board on PowerPC.
it has been tested on the Appian Jeronimo 2000 on x86.
it has not been tested at all on any other board ; you've been warned ! Any report on other boards (or even the same) is welcome.
it will works only for PCI (or AGP) boards, not for SBus, VME or whatever.
it seems to work fine with the latest CVS XFree86 driver ('glint').
now works with XFree86 'fbdev' driver.
might have support for multiple boards. note: apparently fbgen is not multiboard-aware, you will have trouble when playing with virtual console - and multiboard support in all other parts isn't that good anyway.
might have support for multiple chips per board (like Appian boards, the J2000 sort of works now)
fully accelerated (character drawing, erasing, moving, inverting). Hardware cursor is not and will likely not be supported.
it has been tested with linux-2.2.18, linux-2.2.19, and with ppc-patched linux-2.4.2-pre4, linux-2.4.3pre6 and linux-2.4.5pre3.
it works OK with OpenFirmware (as implemented in linux & macintoshes).
resolution & depth switching (via fbset) seem to work.
Support 8, 16 and 32 bpp, using 8 (PseudoColor, 256 cells colormap) 16 (TrueColor RGB 565) or 24 (TrueColor RGB 888) significant bits per pixels. 24 bpp is not supported, use 32 bpp instead. 15 significants bits (RGB555) support is underway.
Support VESA power-saving feature.
Does not support flat-panel display, only CRT. If your have a permedia3-based board and a flat-panel display, contact me if you want to try support. I have no way of testing this feature, so I don't add it.

How to use

You will need kernel version 2.2.18, 2.2.19, or a recent 2.4.x (likely >= 2.4.2, nothing earlier has been tested). Assuming LINUXSRC is the path to the top of your linux kernel source tree:

put the files pm3fb.h and pm3fb.c in $LINUXSRC/driver/video
patch linux-2.2.18 (or 2.2.19 or 2.4.x) with the included patch : cd $LINUXSRC ; patch -p1 < linux-2.2.18-pm3.patch or cd $LINUXSRC ; patch -p1 < linux-2.2.19-pm3.patch or cd $LINUXSRC ; patch -p1 < linux-2.4.x-pm3.patch
add the driver to your kernel (you'll need CONFIG_EXPERIMENTAL and CONFIG_PCI)
compile, install, reboot - and enjoy if hell doesn't break loose.

Options (kernel)

All options are of the form <option_name>:[<board_number>:]<options_parameters> Brackets mean the board number (internally used to represent each board, from 0 on) is "optional" Note that for PCIID the board number is mandatory (it defaults to 0 for all other options). Options are separated by a comma ","

exemple: video=pm3fb,mode:640x480-60,pciid:0:1:2:3 will use board at PCIID 1:2:3 with mode 640x480 @ 60 Hz as board #0

note: Apparently kernel 2.4.x need to use "video=pm3fb:" instead of "video=pm3fb," ; colons instead of comma.

mode:[Y:]XXXXX where XXXXX is one of the valid mode described in pm3fb.c (modebase) and Y an (optional) board number. Default is 800x600-75 w/o OpenFirmware, whatever was available upon boot with OF. example : video=pm3fb,mode:800x600-75 or video=pm3fb,mode:0:800x600-75
pciid:X:B:S:F with X the board number (in the driver), B the Pci Bus number, S the Pci Slot number, and F the Pci Function number. example : video=pm3fb,pciid:0:0:14:0
off:[Y:] or disable:[Y:] (no parameter beyond optional board number Y) disable the board. The board will be allowed internally, but will not be either initialized or used. It's useful if you want to use another driver (offb, vesafb) or skip one board. warning : you should always use pciid and give explicit board number with this option, to make sure the right one is disabled. example: video=pm3fb,pciid:0:0:14:0,off:0:
off (all by itself) : disable all boards. Effectively pm3fb will only go trough all PCI devices and do nothing.
noaccel:[Y:] (no parameter beyond optional board number Y) disable acceleration for board Y. As with off:, it's safer to explicitely give a board number.
font:[Y:]FONTNAME Board Y will default to font of name FONTNAME. example: video=pm3fb,font:VGA8x8

note: internal board number must be allocated in order, without hole ; card number #2 will be used only if card #0 and card #1 are.

note 2: Except for off, each option apply to one board ; for instance, pm3fb,font:VGA8x8 will change font for board 0 but not for board 1.

Options (module)

Options names are the same, but the syntax is different; you must use:

<option_name>=<value_board0>[,<value_board1>[,<value_board2>[...]]]

Options are separated by space. boolean option (noaccel, disable) use '0' (default) or '1' as value.

example: mode=800x600-75,640x480-60 disable=0,1 pciid=0:14:0,0:16:0 will use PCI:0:14:0 as enabled board 0 in 800x600-75, and PCI:0:16:0 as disabled board 1 in 640x480-60.

Known Bugs & workaround

Thanks to the help of Sven Luther, the only known bug has been fixed. Depth switching between 8bpp and 16/32bpp now works.

The original description of this bug was:

The only known bug at the moment relate to depth switching : when going from an 8 bit VT to a 16 or 32 bit VT (using fbset -depth 32 on the current VT or switching among previously-set VT), the colormap is totally wrong. Colormap is restored by going back-and-forth to XFree86 4.x (when using the glint driver). A known workaround involve patching the kernel, but that may broke other fbgen-dependant video drivers :

In the file linux/drivers/video/fbgen.c, there is a function fbgen_switch(). You need to remove the call to fbgen_install_cmap() near the bottom of the function (second-to-last statement). This patch is not included in the distributed linux patch : as said before, it might break other video drivers.

Also, this fix does not work the first time if you boot in 8 bit depth, you need to use the XFree86 trick to get a first working 16/32 VT (if you boot in 16/32bpp this is OK by default).

Todo

more bugs fix

Tools

Warning: those are crude tools, to be used by programmer. If you don't know how to use the output they produce, don't use it.

fbtimings2pm3, convert timings in /etc/fb.modes format to timings ready for use in pm3fb.c. Read stdin and give result on stdout. latest version.
xftimings2pm3, convert timings in XF86Config-4 (the Mode/EndMode in a Monitor section) format to timings ready for use in pm3fb.c. Read stdin and give result on stdout. latest version.

Changelog

Thu Jun 14 10:13:52 MET DST 2001, v 1.4.2: Fixed depth switching bug, preliminary 15bpp (RGB5551) support.

Thu Apr 12 11:16:45 MET DST 2001, v 1.4.1B: Doc updates.

Fri Apr 6 11:12:53 MET DST 2001, v 1.4.1: Configure.help, minor cleanup

Thu Mar 29 10:56:50 MET DST 2001, v 1.4.0: Module & module options support (note: linux patch changed, 2.2.19 added).

Thu Mar 15 15:30:31 MET 2001, v 1.3.2: Fixed mirroring bug on little-endian.

Wed Mar 14 21:25:54 CET 2001, v 1.3.1: Fixed bug in BlockMove (_bmov).

Tue Mar 13 10:53:19 MET 2001, v 1.3.0: Character drawing hardware support (in all width between 1 and 16), fixes.

Thu Mar 8 10:20:16 MET 2001, v 1.2.2: Better J2000 support, "font:" option.

Tue Mar 6 21:25:04 CET 2001, v 1.2.1: Better acceleration support.

Mon Mar 5 21:54:17 CET 2001, v 1.2.0: Partial acceleration support (clear & bmove)

Mon Mar 5 12:52:15 CET 2001, v 1.1.3: Big pan_display fix.

Sun Mar 4 22:21:50 CET 2001, v 1.1.2: (numerous) bug fixes.

Fri Mar 2 15:54:07 CET 2001, v 1.1.1: Might have Appian J2000 support, resource mangement in 2.4

Wed Feb 28 18:21:35 CET 2001, v 1.1.0: Might have multiple boards support (added, but not yest tested)

Tue Feb 27 17:31:12 CET 2001, v 1.0.6: fixes boot-time mode select, add more default mode

Tue Feb 27 14:01:36 CET 2001, v 1.0.5: fixes (1.0.4 was broken for 2.2), cleaning up

Mon Feb 26 23:17:36 CET 2001, v 1.0.4: preliminary 2.4.x support, dropped (useless on pm3) partial product, more OF fix

Mon Feb 26 20:59:05 CET 2001, v 1.0.3: No more shadow register (and wasted memory), endianess fix, use OF-preset resolution by default

Wed Feb 21 22:09:30 CET 2001, v 1.0.2: Code cleaning for future multiboard support, better OF support, bugs fix

Wed Feb 21 19:58:56 CET 2001, v 1.0.1: OpenFirmware support, fixed memory detection, better debug support, code cleaning

Wed Feb 21 14:47:06 CET 2001, v 1.0.0: First working version